Handleiding
Je bekijkt pagina 29 van 56
Functions and operation
EN
bora.com 29
4.5.10
Cooking zone timer
This automatic cut-off function automatically switches off the
selected cooking zone once a preset time has lapsed. The timer
function can also be used on several cooking zones at the same time
(multi-timer).
Activating the timer
u
Tap on a cooking zone
T
The additional cooking zone functions are displayed.
T
If the chosen cooking zone is not yet active (=power level ) a
power level can now be set.
u
Tap the timer button
T
The time appears in the 7-segment display above the sliders in
hours, minutes and seconds ( : : ).
T
The system changes to colour mode “beige”.
Setting the time
u
Set the desired time:
Command Selection in hr/min/sec
Tap
Tap
Command Increase time Decrease time
Tap
Swipe
upwards downwards
Tab.4.7
Setting the time
The start button appears in the operating panel display.
Starting the timer
u
Tap the start button
T
An acoustic signal can be heard and the set value is confirmed.
T
The set time starts to count down.
T
The timer symbol is shown next to the cooking zone.
T
The operating panel display changes to the standard display after
3.5 seconds.
T
10 seconds before the set time lapses, the system flashes the
remaining time. The corresponding cooking zone flashes.
Showing the remaining time
The cooking zone timer is active and the time counts down:
u
Tap the cooking zone
T
The remaining time is shown in the multi-function display.
Changing active timers
u
Tap a cooking zone with an active timer
T
The remaining time is displayed.
u
Tap the timer button
T
The timer is stopped.
T
The remaining time flashes in the display.
T
The system changes to timer editing mode.
u
Change the set time.
u
Confirm the new set time and start the timer.
Switching the timer off early
u
Tap a cooking zone with an active timer
T
The remaining time is displayed.
u
Long press on the timer button
T
The timer is switched off.
T
The system switches to the standard display.
T
The cooking zone remains active on the set power level.
Time lapsed
T
An acoustic signal is heard.
T
The time display : : and the timer symbol flash briefly.
T
After the end of the set time, the cooking zone is automatically
switched to power level 0.
Multi-timer
u
Tap on a different cooking zone
u
Activate the timer.
u
Set the time.
u
Start the timer
4.5.11
Pause function
With the pause function all cooking zones can be quickly and easily
deactivated temporarily. When the function is cancelled, operation
resumes at the original settings. The cooking session can be paused
for a maximum of 10 minutes. Once 10 minutes have lapsed, the
cooking session is automatically ended.
During the pause, fan function is not interrupted. Active
bridging and short-time timer functions remain active. Active
cooking zone timers are stopped.
Activating the pause function
u
Tap the pause button .
T
The pause button lights up, all cooking sessions are paused and an
acoustic signal is heard.
T
The cooking zone indicators are dimmed and flash.
T
The pause timer is started (max. 10 min).
Deactivating the pause function
u
Long press on the pause button .
T
The pause button is dimmed.
T
The cooking zone indicators light up and stop flashing.
T
All cooking sessions are resumed at the power levels set prior to
the pause.
T
Active cooking zone timers are resumed.
4.5.12
Pan size recognition
On induction cooktops the cooking zone recognises the size of the
cookware automatically and only targets the energy at that area. It
also recognises cookware that is unsuitable or too small, or if there is
no cookware present. A cooking zone is not working if / are
alternated in the display. This happens if
T
it is switched on without cookware or with unsuitable cookware;
T
the base diameter of the cookware is too small;
T
the cookware is removed from a switched-on cooking zone.
If no pot is recognised 9 minutes after setting a power level, the
cooking zone will switch off automatically.
Bekijk gratis de handleiding van Bora Classic 2.0 CKI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bora |
| Model | Classic 2.0 CKI |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7782 MB |
