Handleiding
Je bekijkt pagina 27 van 56
Functions and operation
EN
bora.com 27
4.5.4
Automatic heat up function
When the automatic heat up function is activated, the cooking zone
works at full power for a certain time and is then automatically reset
to the previously set level.
Power level
(continuous cooking
level)
Cooking duration in min:sec
Cooktops
CKFI, CKI, CKIW, CKG
Cooktops
CKCH, CHCB
00:40 1:00
1:00 3:00
2:00 4:48
3:00 6:30
4:20 8:30
7:00 2:30
2:00 3:30
3:00 4:30
Tab.4.5
Heating time overview
The system automatically determines the heating time
depending on the power level set.
Activating the automatic heat up function
u
Tap the required cooking zone
u
Setting the power level (= continuous cooking level)
u
Tap the heat-up button
T
The automatic heat up function is activated.
T
The automatic heat up function symbol is shown next to the
cooking zone.
If the cooking zone power level is increased while the
automatic heat up function is active, the automatic heat up
function remains active. The heating time is adjusted
accordingly.
If the cooking zone power level is decreased while the
automatic heat up function is active, the automatic heat up
function is deactivated.
Deactivating the automatic heat up function early
u
Tap the required cooking zone
u
Long press on the heat-up button
T
The automatic heat up function is deactivated.
T
The cooking zone changes back to the previously set power level.
Time lapsed
T
When the heat up time has lapsed, the previously set continuous
cooking level will be activated.
T
An acoustic signal is heard.
T
The heat-up symbol will no longer be displayed.
4.5.5
Power setting
When the power setting is activated, maximum cooking zone power is
available for a predefined time. The available power is targeted at the
cooking zone, meaning that the max. power of the other cooking
zone is automatically reduced temporarily to power level 5
(exception: gas cooktop and Tepan stainless steel grill). If a power
level higher than 5 is set for the second cooking zone, the active
power setting on the first cooking zone will be automatically switched
back to the previous level.
Never heat up oil, fat and the like on the power setting. The
bottom of the pan can overheat due to the high power output.
Activating the power setting for a cooking zone
u
Tap the required cooking zone
u
Tap when power level 9 is active
or
u
long press on the top end of the slider (slider position 7–9)
or
u
swipe to power level 9 and hold the position
T
An animation appears in the slider.
T
appears in the cooking zone display (flashing 3 times at first and
then continuous).
After 10 minutes, the power setting is automatically switched
back to power level 9. Exception: on the gas cooktop the
power setting is limited to 20 minutes.
Deactivating the power setting
the power setting is deactivated early if another power level is set.
4.5.6
Two-ring connection on cooktops
CKCH and CKCB
A second, larger ring can be easily switched on. This enables rapid
adjustment to the cookware used.
Requirements for two-ring connection:
T
Cooking session with a power level >0
Activating the second ring
u
Tap the required cooking zone
u
Adjusting the power level
u
Tap the ring button
T
The second ring is activated in the chosen cooking zone.
T
The cooking session is continued at the set power level with two
active rings.
T
The ring symbol is shown next to the cooking zone indicator.
The two-ring connection can also be activated or deactivated
when the heat-up, timer and heat retention functions are
active. When the bridging function is activated, the second
ring is automatically activated.
Deactivating the second ring
u
Tap the required cooking zone
u
Long press on the ring button
T
The second ring is deactivated.
T
The cooking session is continued at the set power level with only
one active ring.
4.5.7
Bridging function
With the bridging function two cooking zones can be combined to form
one large cooking zone. The power for the combined zones is then
adjusted by a single operating control. Power adjustment takes place
simultaneously (both cooking zones are operated on the same power
level). The bridging function is suitable for heating food, e.g. in a roaster.
Bekijk gratis de handleiding van Bora Classic 2.0 CKI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bora |
| Model | Classic 2.0 CKI |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7782 MB |
