Handleiding
Je bekijkt pagina 25 van 56
Functions and operation
EN
bora.com 25
T
The system changes to colour mode “beige”.
T
The cooking zones in the display are dimmed.
Setting the time
u
Set the desired time:
Command Selection in hr/min/sec
Tap
Tap
Command Increase time Decrease time
Tap
Swipe
upwards downwards
Tab.4.3
Setting the time
The start button appears in the operating panel display.
Starting the short-time timer
u
Tap the start button .
T
An acoustic signal can be heard and the set value is confirmed.
T
The set time starts to count down.
T
The operating panel display changes to the standard display.
T
The remaining time is shown by the system exact to the second.
T
10 seconds before the time runs out, the remaining time and short-
time timer button start to flash.
Time lapsed
T
When the set time has lapsed an acoustic signal is heard (max. 60
seconds).
T
The time display and short-time timer button flash (max. 60
seconds).
T
The remaining time is counted down for another 60 seconds
maximum (- : : ,...)
You can stop the acoustic signal and flashing display by
tapping the short-time timer button.
Deactivating the short-time timer early
u
Long press on the short-time timer button .
T
The short-time timer is stopped.
T
The operating panel display changes to the standard display.
4.4
Operating the cooktop
extractor
To be able to operate the cooktop extractor, fan operation
must be active in the operating panel (colour mode “blue”).
The slider and the fan symbol light up blue in the standard display.
4.4.1
Setting the fan power levels
The power levels are adjusted via the operating panel by tapping or
swiping movements on the touch slider.
The fan power levels can be adjusted in different ways:
u
by tapping or
u
adjustment using the slider
u
by tapping a certain position on the slider
u
long press on or (adjustment in twos)
4.4.2
Fan power setting
When the power setting is activated, maximum extractor power is
available for a predefined time. This power setting makes it possible
to suction away high levels of cooking vapours more quickly. After 10
minutes, the power setting is automatically switched back to power
level 9.
Activating the power setting
u
Long press on the slider at position 5
or
u
tap on when power level 5 is active
T
An animation appears in the slider.
T
appears in the display (flashing 3 times at first and then
continuous).
Deactivating the fan power setting
The fan power setting is deactivated early if another power level is
set.
4.4.3
Automatic extractor function
The extractor power level automatically adjusts itself depending on
the current cooktop settings. No manual adjustment of the fan
controls is necessary but it is possible. The extractor power is
automatically adjusted to the highest power level used on all cooking
zones that are currently in use.
Function Power levels
Cooking level 1 2 3 4 5 6 7 8 9 P
Extractor power 3 3 3 4 4 4 5 5 5 P
Tab.4.4
Extraction performance and cooking level
T
A change in the power level of a cooking zone results in automatic
adjustment of the extractor power after a delay of 20 seconds on
induction cooktops and 30 seconds on all other cooktops.
T
The automatic extractor function can be disabled manually at any
time.
Permanently activating the automatic extractor function:
(see"5.4.3Menu item 3: Automatic extractor control")
Activating the automatic extractor function for a cooking
session:
u
tap the fan button .
T
The fan symbol lights up.
T
An animation appears on the slider.
T
is displayed.
4.4.4
Switching the fan off
Switching the fan off
u
Swipe downwards to power level 0
or
u
tap until power level 0 is reached
or
u
long press on the fan button
or
T
the automatic after-run function is started.
T
As soon as the automatic after-run stops, the cooktop extractor
fan is switched off.
Bekijk gratis de handleiding van Bora Classic 2.0 CKI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bora |
| Model | Classic 2.0 CKI |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7782 MB |
