Handleiding
Je bekijkt pagina 33 van 56
User menu
EN
bora.com 33
Fig.5.8
Menu item 7: Retrieving the hardware version
5.4.8
Menu item 8: System software
update
A system software update may be necessary for
troubleshooting.
The latest software for the BORA Classic 2.0 system is
available free of charge on the BORA website (www.bora.com
– Products – BORA Classic 2.0 – BORA Classic cooktop
extractor CKA2/CKA2AB – Documents).
Scan the QR code and you will be redirected to the page with
the latest software.
A USB stick with FAT32 formatting is needed to save the
update file. This USB stick must be inserted into the USB port
on the cooktop extractor.
A valid update file must be stored on the USB stick. You can
obtain the update file from the BORA Service department
upon request.
Starting the software update
u
Insert the USB stick with the update file in the USB port on the
cooktop extractor.
u
Tap the slider
T
The software update is started.
T
The indicator for the first part of the update process flashes.
Fig.5.9
Menu item 8: Starting the software update
Update process
The update process has three stages. These three stages are shown
in the display by beige slider segments. The currently active stage will
flash. If a stage in the process has been completed successfully, the
corresponding segment will stop flashing and will light up green. The
next stage in the process is started.
T
If the update is completed without errors, all three segments will
light up green. The system will then be restarted automatically.
T
The update has been completed successfully if is shown
in the display when the system is restarted.
T
If an error occurs during an update stage (the corresponding slider
segment lights up red), the complete update process is terminated.
An error message appears in the operating panel display (e.g.
; see"8Troubleshooting").
Fig.5.10
Menu item 8: Software update process stages
5.4.9
Menu item 9: Data export
Data export makes error analysis easier.
Data is exported in three stages. The stages of the three processes
can be seen in the operating panel display as in the “software
update”.
A USB stick with FAT32 formatting is needed to save the
update file. This USB stick must be inserted into the USB port
on the cooktop extractor.
Bekijk gratis de handleiding van Bora Classic 2.0 CKG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bora |
| Model | Classic 2.0 CKG |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7782 MB |
