Handleiding
Je bekijkt pagina 14 van 56
Appliance description
EN
14 bora.com
Indicator Fan (cooktop
extractor)
Colour
Slider Blue
Plus/minus Blue
Fan symbol/automatic
extractor function
Blue
Indicator Cooking zones Colour
Slider Red
Plus/minus Red
Cooking zone hot Signal red
Indicator Functions Colour
Switch animation on/
off
Beige
Set timer Beige
Indicator Messages Colour
Warnings Orange
Error Signal red
OK Green
Tab.3.6
Colour indicator
3.2.5
Lighting
The operating panel has 4 different levels of lighting. (100%, 75%, 50%
and 0%).
On principle the system adapts the lighting to the current operating
scenario. Relevant display elements are more brightly lit and
irrelevant ones are dimmed. Unavailable functions are faded out.
Lighting Use
100% Function is active and selected
75% Function is active but not selected
50% Function is inactive and can be selected
0% Function is unavailable
Tab.3.7
Lighting
Example:
1
2
Fig.3.5
Operating panel lighting
[1]
Active and selectable function (brightly lit, 75%)
[2]
Inactive but selectable function (dimmed, 50%)
3.2.6
Sounds
The volume of the acoustic signals can be set in the menu
(10% to 100% ).
Safety-relevant acoustic signals are always emitted with the
volume at 100%.
The acoustic signals from the cooking zone timer and short-
time timer are always emitted with the volume at 100%.
The system basically differentiates between three different types of
acoustic signals:
Acoustic signal Purpose
Short beep (0.25 s ) Confirmation of a selection
Sequence of beeps Interaction required
Long beep (0.75 s ) End of a function
Tab.3.8
Sounds
3.2.7
Filter service display
The maximum service life of the recirculation filter is defined by the
filter type configured in the system (filter service life). Depending on
the type of filter fitted, the filter service display will be activated after
300 or 600 operating hours.
T
If the fan symbol lights up yellow and the multi-function display
shows after switching on the cooktop extractor, this is
informing you that the filter needs to be changed soon.
T
If the fan symbol lights up in signal red and the error code
is shown in the multi-function display after switching on the
cooktop extractor, the end of the filter service life has been
reached and the filter must be replaced (see"7.3.4Replace the
activated charcoal filter").
If the service life of the activated charcoal filter is exceeded,
the correct functioning of the system may be affected. It is
still possible to use the cooktop extractor, however, the
warranty and guarantee claims shall then be invalid. The
components of the grease filter require regular cleaning
regardless of the filter service display.
3.3
Cooktops
The cooktops are the variable components for the system and
can only be operated in conjunction with the cooktop extractor.
You can see exactly which appliances have been installed in
your system on the penultimate page of the Operating
instructions (see"10Identification plates").
3.3.1
Model description
Model Long description
CKFI Classic surface induction glass ceramic cooktop with 2
cooking zones
CKI Classic induction glass ceramic cooktop with 2 cooking
zones
CKIW Classic induction glass ceramic wok
CKCH Classic Hyper glass ceramic cooktop with 2 cooking
zones 1-ring/2-rings
CKCB Classic HiLight glass ceramic cooktop with 2 cooking
zones 1-ring/2-ring/roaster
CKG Classic gas glass ceramic cooktop with 2 cooking zones
CKT Classic Tepan stainless steel grill with 2 cooking zones
Tab.3.9
Model description
Bekijk gratis de handleiding van Bora Classic 2.0 CKG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bora |
| Model | Classic 2.0 CKG |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7782 MB |
