Handleiding
Je bekijkt pagina 34 van 96
16
Instructions
GB
9.2. Over-heating
When the thermal probe on the Power board detects a room temperature of >100°C, all the thermal elements of the oven automatically
turn off. If this persists for more than 1 minute, the clock display shows “STOP”, and every command on the key board is ignored until
the temperature goes below this limit.
9. MALFUNCTION SIGNALS
9.1. Detecting malfunctions
When a malfunction occurs, the control system begins to monitor this signal and considers it plausible only if it persists for more than
1 minute. If during this minute another malfunction presents itself, the system considers it plausible if it persists for more than 4 se-
conds.
When the malfunction is plausible, the system passes to the Malfunction display mode: the oven is off, all the loads are deactivated,
and the “Err” message appears, alternating with the type of malfunction detected:
“Shor” : oven probe in short circuit
“OPEN”: oven probe in open circuit and not connected
“ntc1” : thermal probe on Power board
During this phase, the malfunction signal can be “annulled” by pressing any key: if the malfunction is still present, everything returns
to the display mode after 1 minute.
If the malfunction is not autonomously resolved, the control continues to indicate “Err”, without any additional explanation.
If a probe malfunction occurs, the system reacts as if a temperature higher than 500°C has been reached.
Bekijk gratis de handleiding van Bompani BO243EA/E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bompani |
| Model | BO243EA/E |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 10718 MB |
Caratteristiche Prodotto
| Soort bediening | Sensor |
| Kleur van het product | Roestvrijstaal |
| Ingebouwd display | Ja |
| Breedte | 596 mm |
| Diepte | 524 mm |
