Bompani BO05283E handleiding
Handleiding
Je bekijkt pagina 8 van 36
8
SM2934
INSTALLING THE WASHING MACHINE
USING THE WASHING MACHINE
RECOMMENDATIONS PRIOR TO USE
Warning: Before carrying out the rst wash, allow the washing
machine to effect a short wash cycle without any washing.
This will allow the operation of the washing machine to be checked
and will clean the drum.
Before each wash make sure that:
▼ the water connections are correct, the drain hose is properly positioned (see
connecting to the water supply) and that the water supply valve is open.
▼ with dry hands, insert the plug in the mains socket.
▼ sort the wash into types of fabric (refer to clothing care symbols).
▼ check that there are no objects left in any of the pockets of the items to wash,
as these may damage the washing, the appliance or the lter.
14
15
Open
Closed
EN
WARNING: THIS APPLIANCE MUST BE EARTHED.
The mains lead of this appliance is tted with a BS1363A 13 amp fused
plug. To change a fuse in this type of plug use an A.S.T.A. approved
fuse to BS1362 type.
1. Remove the fuse cover (A) and fuse (B) (g 12).
2. Fit replacement 13 amp fuse into fuse cover.
3. Re t both into plug.
IMPORTANT: The fuse cover must be retted when changing a fuse and if the
fuse cover is lost the plug must not be used until a correct replacement is tted.
Check that the voltage indicated on the technical data plate on the back of the
washing machine is the same as that of the mains power supply (g. 13).
The fuses, electric cables and wall socket must be rated to withstand the maximum
power load indicated on the data plate.
On completion of the installation, the appliance must be connected to the mains
supply through a two-pole switch.
The power supply socket into which the washing machine will be plugged must
be earthed. Otherwise, the manufacturer will not be held responsible for any
accidents.If the socket to which the machine will be connected is faulty or does
not comply with the requirements, it must be replaced by a qualied electrician.
The washing machine must not be connected to the electricity supply using
extension leads or multi-plug adapters.
During maintenance the washing machine must be unplugged from the power
supply socket.
Do not plug-in or unplug the machine with wet hands.
If the power cable is damaged in any way, contact the specialised technical
service centre.
Position the appliance so that the power supply cable can be accessed with ease,
enabling it to be disconnected when required.
CONNECTING TO THE MAINS ELECTRICITY SUPPLY
13
B
A
12
Bekijk gratis de handleiding van Bompani BO05283E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bompani |
| Model | BO05283E |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5710 MB |
