Bompani BO05030/E handleiding
Handleiding
Je bekijkt pagina 5 van 20
5
SM3072
CONTROL PANEL
EN
DISINFECTING THE DRUM
: Frequent washes at low temperatures may encourage the for-
mation of mildew and unpleasant odours inside the washing machine. The DRUM DISINFECTION
function thoroughly cleans the machine with a special cycle at 90°C.
DRUM DISINFECTION automatically recommends, through the blinking of the abbreviation on
the display, that you start the cleaning program after a certain number of washes, if high temperature
cycles have not been selected during the period.
Remove all laundry from the drum, put the knob I on the DRUM DISINFECTION program and press
the start H button to start the cycle.
The DRUM DISINFECTION program can be performed at any time or when conditions require it.
Empty the washing machine drum and close the door.
Put the knob I on the DRUM DISINFECTION program, keep the button
pressed until the ab-
breviation appears on the display. Press H to start the DRUM DISINFECTION cycle.
N.B. if, during a pause, no operation is carried out, the wash phase will restart automatically after
5 minutes.
CONTROL LOCK (child safety lock): to activate the control panel lock, simultaneously press the B-E
(lock symbol) buttons; three horizontal lines will appear on the display.
If, during the wash cycle or at the end of the cycle, you wish to reactivate the controls, press buttons
B-E simultaneously, until the three horizontal lines disappear.
EASY LOGIC: The EASY LOGIC automatically adjusts washing time, water and energy consumption
based on the actual amount of laundry loaded in the machine.
The 1/2 load function is unnecessary as the EASY LOGIC system automatically sets the wash
parameters.
DRYING: Drying activate the option, the display will show the symbol
indicating
the level of drying and duration (h:min). In the case in which has been selected at
the beginning of the drying cycle the washing program, this will start automatically
and the total time on the display means of washing + drying. Until we will begin the
process of drying, you can change the time by touching the button on the display,
putting the machine to pause (see Start/Pause). With this option enabled no you can
exclude the spin cycle and put in the basket dispenser detergents, during drying,
can melt and damage linen and washing machine.
START/PAUSE: When programs and wash options are being selected, the start LED
remains off. To confirm your selection and start the wash cycle, press the H button.
The LED turns on. During the wash program in progress, the cycle can be stopped
by pressing the START/PAUSE button for a couple of seconds.
At this point, the wash program stops and you can make changes to the wash op-
tions (enabled depending on which stage of the wash cycle you are in). If the water
temperature is below 50°C, the door can be opened (about 2 minutes after enabling
the pause function) to load/empty any laundry.
To re-enable the wash phase press the START/PAUSE button again.
To achieve the best drying performance of clothes washed, the maximum load of washing declared (see
program table), you should run this cycle in two phases with a maximum load does not exceed the value
stated on the rating plate.
Bekijk gratis de handleiding van Bompani BO05030/E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bompani |
| Model | BO05030/E |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2835 MB |
