Bomann WAT 7186 handleiding
Handleiding
Je bekijkt pagina 45 van 52
45
Timed drying process with selectable running times of 0:30/1:00/1:30/2:00/3:00/4:00
hours/minutes. Ideal for small quantities of laundry and post-drying of multi-layered textiles.
Wash temperature
Select the temperature corresponding to the textiles
and pollution. Basically: the higher the temperature,
the higher the power consumption.
90°C : Heavily soiled pure white cotton or linen (e.g.
tablecloths, sheets and towels).
40°C_60°C : Moderately soiled colored cotton, linen
and synthetic (e.g. shirts or underwear). Slightly
soiled whites (e.g. underwear).
cold_20°C_30°C : Normally soiled laundry (including
synthetic and wool).
Capacity
Do not overload the appliance otherwise the laundry
is not getting clean. Refer to the information in the
"Program table"
.
Starting the program
• Connect the appliance to the power supply and
switch it on.
• The water supply must be opened to the maxi-
mum pressure.
• Load your laundry and fill in the detergent, if nec-
essary.
• Close the appliance door properly.
• Set the required washing conditions.
• Start the operation with Start/Pause button.
Door lock
Once the wash program has started, the appliance
door cannot be opened.
When the wash cycle is finished, the door lock will
automatically be unlocked.
Refill laundry
WARNING:
Never attempt to force open the appliance door dur-
ing operation.
Once the program has started, you can add or re-
move laundry as required – if the corresponding LED
lights up.
• Interrupt the washing process with the
Start/Pause button.
The appliance checks whether it is possible to add
laundry and, if necessary, releases the door lock
after a short time.
As soon as the water temperature or the water level
exceeds a certain value, the door remains locked for
safety reasons and reloading
is not possible.
• Press the Start/Pause button again to resume
operation.
Changing the program
• First interrupt the washing process with the
Start/Pause button and switch the appliance off
and on again briefly.
• Select the desired program and restart operation.
Canceling the program / draining water
• Switch the appliance off briefly and then on again
to end the current program.
• Start the »Spin« program to pump out the wash
water.
Bekijk gratis de handleiding van Bomann WAT 7186, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bomann |
| Model | WAT 7186 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6117 MB |
