Handleiding
Je bekijkt pagina 26 van 44
26
• Continue to check the seal regularly for dirt and
damage!
Defrosting
CAUTION:
Never use metal objects (e.g. knives) to remove ice
from the evaporator. Otherwise, it can be damaged.
To achieve better cooling and to save energy, defrost
the appliance
regularly.
• To start the defrosting process, turn the tempera-
ture control to the off state and disconnect the
appliance from the power supply.
• Remove the appliance content and keep covered
at a cool location.
•
Once the ice has melted, empty the condensation
drip tray below the chilling compartment; wipe up
the condensation water and dry the unit interior.
• Then you may restart the appliance by connecting
the plug and turning the temperature control.
Changing the light
CAUTION:
Do NOT remove the cover of the light. The LED light
may be replaced / repaired in case of failure / defect
only by an authorized specialist.
Notes for the
authorized specialist!
Illuminant data: DC12V, 2.0 W
This product contains a light source of energy effi-
ciency class G.
• Disconnect the appliance from the power supply!
• Carefully remove the plastic cover.
• Remove the bulb from the holder.
• Replace the defective bulb and reassemble cor-
rectly in reverse order.
Replacing the door hinge
If the appliance door starts to stutter, crack or jam
when you open it, it is probably due to a worn or
damaged hinge.
It is recommended to replace all door hinges at the
same time, otherwise the next repair will soon be
beckoning.
• Remove the contents of the appliance and the
movable interior parts.
• Tilt the appliance backwards and block it in this
position to prevent the door from sliding out.
• The disassembly of the upper and lower door
hinges is done as described under
"Reversing
the door opening"
.
• The respective hinge assembly is carried out in
reverse order.
• Open and close the appliance door for a test run,
readjust the hinges if necessary. In any case,
make sure that the door fits tightly and accurately.
Troubleshooting
Before you contact an authorized specialist
Problem / cause / action
Appliance is not working properly or at all
- Check the power supply / temperature setting /
ambient temperature.
- Unblock the ventilation openings, install the ap-
pliance freely.
Loading is too warm
- Check the temperature setting / ambient temperature.
- A large quantity of warm food has been stored in
the unit in the last 24 hours.
- The appliance door is not closed properly, check
the door seal.
Loud noise during operation
- Check that the appliance is level.
- See
"Operating noise"
.
Bekijk gratis de handleiding van Bomann KS 7257, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bomann |
| Model | KS 7257 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 5082 MB |
