Handleiding
Je bekijkt pagina 22 van 44
22
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter
“Cleaning and maintenance”.
Starting the appliance
• Connect the appliance to the power supply.
• Set the operating conditions. See also the follow-
ing sections.
Settings
Position [ 0 ] means that the appliance is in the
switched-off state. Turn the temperature control
clockwise from this position, the appliance switches
on automatically.
The power levels [ 1 – 7 ] control the different values
of the internal temperature.
Power level
1, 2
lowest level,
warmest internal temperature
3, 4
medium level,
optimal operating temperature
5, 6, 7*
highest level,
coldest internal temperature
*Beware of high setting because the maximum level may
already mean "freezing point".
The temperature of the fresh zone is automati-
cally controlled by the power level setting in the
fridge.
Basically, the temperature changes depending on the
ambient temperature (place of installation), the fre-
quency of opening the door and the equipment.
For initial operation, first set the lowest possible in-
ternal temperature (highest power level) until the
appliance has reached the desired operating tem-
perature. It is recommended to reset to a medium
power level afterwards, then you can easily make
any temperature correction.
Recommendation, for optimized food storage and to
avoid food waste, a medium power level is generally
best. A high-power level also increases energy con-
sumption.
The recommended fridge temperature in the
center of the appliance is approx. 4∼7 degrees. If the
temperature in the center is correct, the different
zones usually also have the correct temperature.
Interior light
When opening the appliance door, the interior light
will turn on automatically.
Equipment
Note that the equipment varies depending on the
type of appliance.
The various shelves and drawers can be height-
adjusted (partially and model-dependent) or removed
for individual storage. Practical also for cleaning pur-
poses.
NOTE:
For the most efficient use of energy, place all
shelves/drawers in their original positions.
Removing / inserting the shelves
• To remove, open the appliance door completely,
lift the shelf, if necessary, slant slightly and pull it
out to the front.
• Insert the shelf at the desired height at a slight
angle and push it in until the stop is reached.
Removing / inserting the door racks
• To remove, open the appliance door completely,
press the door rack upwards out of the holder or,
Bekijk gratis de handleiding van Bomann KS 7254, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bomann |
| Model | KS 7254 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 4836 MB |
