Bolin Technology VCC-M2H10BI-4FN1 handleiding

Bewakingscamera

Bolin Technology

36 pagina's

PDF beschikbaar

Handleiding

• Using RS-485 (PELCO), all camera addresses must be set up before the connection. You can set the camera

address by operating OSD menu, or by setting the Dip Switch on the bottom of the camera. In this case, you can

use multiple control keyboards.

VISCA over IP Control

With VISCA over IP function, you can control the camera using VISCA protocol on a controller equipped with

IP communication capabilities via LAN.

The communication specifications of VISCA over IP are followings:

• Interface: RJ-45 10/100M

• Interface protocol: IPv4

• Transport protocol: UDP

• IP address: 192.168.0.13 By default

• Port: 52381

VISCA over IP Network Configuration

Re-assign the camera

The default information of the IP camera is following:

• Static IP: 192.168.0.13

• Subnet mask: 255.255.255.0

• Gateway: 192.168.0.1

• VISCA over IP control port: 52381.

The camera IP address needs to be assigned to the IP address that works with your local network.

How to make the connection with BOLIN products

Please see the User Guide “BOLIN Camera and Keyboard Controller Connection”

that you can download it at www.bolintechnology.com product pages.

Bekijk gratis de handleiding van Bolin Technology VCC-M2H10BI-4FN1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.