Bolin Technology VCC-M2H10BI-4FN1 handleiding

Bewakingscamera

Bolin Technology

36 pagina's

PDF beschikbaar

Handleiding

Camera Initial setting status Information

Information of the camera initial setting status will display for 5 seconds.

1. Camera PELCO ID for RS-485 control

2. Camera ID for IR Remote Controller

3. IR remote control signal receive current setting

4. Baud Rate current setting

5. Control COMM Port current setting

6. Video format current setting

7. HDMI current setting

8. Model number

9. Firmware version

Audio IN / OUT

Use the USB port to 3.5mm audio jack adaptor (VCC-UA35IO) to connect audio source.

Note

The USB port is only used for Audio physical input and output signal connection. The audio signal can be used for IP

video streaming, USB video streaming, HDMI/SDI?

• A microphone can be connected to the Audio IN port, which feeds audio into the camera. (It does not support

power supply to microphone).

• A speaker can be connected to the Audio OUT port, which will output any audio that is captured on the Audio

In port

• See Manual part 2 for more information about Audio capture

PELCO ID 001

IR ID 01

IR-RECEIVE ON

BAUD RATE 9600

COMM TYPE 422

FORMAT 1080P29.97

HDMI OUT YUV

MODEL TYPE ----

SV: V0B1100S36040AD04

Camera Status Info Display

Bekijk gratis de handleiding van Bolin Technology VCC-M2H10BI-4FN1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.