Bolin Technology FEX-SN-M02202021 handleiding

Bewakingscamera

Bolin Technology

39 pagina's

PDF beschikbaar

Handleiding

PATTERN SETUP:

A pattern is a memorized, repeating series of pan, tilt, zoom, and preset functions that can be recalled with a command from a

controller or automatically by a programmed function (alarm, park, event, or power-up).

The menu is used to manage the patterns. Total of 4 patterns can be managed

PATTERN NUMBER:

The current pattern number that you are managing

RECORD NEW PATTERN:

Set up the above pattern

1. Push the joystick to the right to enter this setting menu

2. Move the camera to the start position you want, and then call the preset 1 to save

3. Move the camera to each position you want to record the pattern, and then call the preset1 to end

4. Finished

RUN CONTINIUSELY: start the above pattern.

EXIT: Push the joystick to the right to exit this level menu.

IDLE TIMER:

If the camera stays in No-operation for certain amount of IDLE Time, the camera would

take action automatically.

The menu is used to set the IDLE time, and value can be selected from 0 to 255 sec.

IDLE ACTION:

After the IDLE time, the camera starts the IDLE action automatically.

Even if the idle time’s value is set to 0, or during the IDLE time, manual operation will always have the priority to the

response.

The menu is used to select the IDLE action.

The IDLE action can be selected from the following:

o OFF

o PRESET1-220

o SCAN1-4

o TOUR1-4

o PATT1-4

EXIT: Push the joystick to the right to exit this level menu.

EXIT

Push the joystick to the right to exit the menu. All setting modifications will be discarded, and will not be applied

PATTERN NUMBER: 001

RECORD NEW PATTERN

RUN CONTINUOUSLY

EXIT

PRESETS SETUP

TOUR SETUP

PATTERN SETUP

IDLE TIMER ：003

IDLE ACTION ：OFF

EXIT

Bekijk gratis de handleiding van Bolin Technology FEX-SN-M02202021, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.