Bolin Technology FEX-SN-M02202021 handleiding

Bewakingscamera

Bolin Technology

39 pagina's

PDF beschikbaar

Handleiding

Install the Tail Cable

Install and detach the Tail Cable included with the product as following:

1. Hold the MS female connector head and pull back the ring of the connector.

2. Insert the MS female connector head into the MS male connector on the camera completely until you hear the lock

sound when the connection is in place and release the ring.

Mounting the Camera

Check Camera Components and Installation Conditions Before mounting your camera, check the device model number and

included contents against the packing list to ensure components are complete.

Important:

1. Verify the bearing capacity of the surface where the camera will be mounted

2. Verify that the mounted position meets the bearing requirements. Otherwise,

you are advised to reinforce the mounted position to support the device weight.

For more information, see the product datasheet.

3. Verify lightning protection and grounding requirements

4. Ground the terminal properly.

NOTE:

• When mounting the camera, please install the bracket

adapter to the bracket first and then mount the camera to the bracket.

• Tighten all the screws to hold the camera securely.

Power Connection

The camera provides two methods of power inputs, either POE (IEEE802.3at) or 12VDC.

Bekijk gratis de handleiding van Bolin Technology FEX-SN-M02202021, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.