Bolin Technology EX1030NX handleiding
Handleiding
Je bekijkt pagina 35 van 39
Enable Tracking Data Output: Toggle the switch at the top to Enable tracking data output. Once enabled, you'll
be able to configure the rest of the settings.
Destination IP Address: Input the IP address where the tracking data will be sent.
Set UDP Port Number: Input the UDP Port Number through which the data will be transmitted. Valid
range: 1025 - 65535
Transfer Mode: Select how often the tracking data should be sent.
Camera ID: To identify the camera when sending tracking data. Values between 0 - 255, and the default
is 255.
System
The Firmware tab displays the current firmware version of the camera.
Bekijk gratis de handleiding van Bolin Technology EX1030NX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bolin Technology |
| Model | EX1030NX |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 9560 MB |
