Bolin Technology EX1030NX handleiding
Handleiding
Je bekijkt pagina 16 van 39
PICTURE: Modify contrast, sharpness, and other image properties.
GAMMA: Fine-tune gamma correction.
LENS: Control lens-related settings.
PAN TILT: Adjust pan/tilt behavior.
SYSTEM: Configure network and operational settings.
STATUS: View camera diagnostics and system information.
PTZ Controls – Allows manual pan, tilt, zoom, and focus adjustments.4.
Roll-Axis Control – Adjust image roll angle.5.
Speed Settings – Toggle between Super Fine and Standard speed modes, and customize pan, tilt, zoom,6.
and focus speeds for precise and responsive control.
PTZ Presets & Auto Scanning – Access preset positions or start/stop auto-scanning patterns.7.
Creating and Recalling Presets
To save presets, the user should adhere to the following steps:
Utilize the PTZ controls of the web interface, IR controller, or a PTZ controller to adjust the camera to the1.
position(s) they wish to save as a preset.
After positioning the camera, click on the ‘Create’ button. Subsequently, select the preset number under2.
which they want to save this setting. Label the preset in the ‘Name’ field and click ‘Save’.
To recall a preset, select the preset number on the Web Interface and click the “Go” button.3.
A saved preset can also be deleted by selecting it and clicking on the Delete button.4.
In the Preset section of the camera's web interface, you'll find several configuration options to optimize
performance for different conditions. Here’s an overview:
58 Night Mode (Set) / Day Mode (Call): Activate Night Mode to enhance visibility in low-light conditions or
switch to Day Mode for standard daytime operation.
59 Auto Day/Night (Call): Automatically toggles between day and night modes based on ambient light
levels.
61 Defog OFF (Set) / ON (Call): Enables or disables the defogging feature to clear mist or fog from the
lens.
62 Sngl. Wiper ON (Set) / OFF (Call): Activates a single wipe to remove debris or water from the lens; can
be turned off when not needed.
63 Heater OFF (Set) / ON (Call): Controls the built-in heater, preventing freezing in cold environments.
64 Cont. Wiper ON (Set) / OFF (Call): Engages the continuous wiper function to keep the lens clear.
95 OSD Menu (Call): Opens the On-Screen Display (OSD) menu for direct camera setting adjustments.
Adjusting and Controlling PTZ Functions
On the “Live View” page, the user will observe a “Menu” icon situated at the bottom right of the live view
image. Additionally, on the right side of the page, there are “Pan/Tilt Controls”. This section comprises a set
of arrows and sliders, specifically designed to control the camera.
The arrows are utilized to pan (move side to side) and tilt (move up and down) the camera. The focus and
zoom buttons are provided for the user to adjust the view. The user can zoom in (+) or out (-), and manually
adjust the focus to be closer (+) or further (-).
Bekijk gratis de handleiding van Bolin Technology EX1030NX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bolin Technology |
| Model | EX1030NX |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 9560 MB |
