Bolin Technology EX1030NX handleiding
Handleiding
Je bekijkt pagina 10 van 39
Plug the DC power adapter into the PoE injector.
Benefit: This method allows for longer cable runs while still providing power and data transmission, ideal for
installations where the camera is far from a network switch.
NOTE: Factory-Default Camera Network Settings
Static IP Address: 192.168.0.13
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1
To change these settings, refer to the Web Interface Configuration section of this guide.
Video Output
The EX1030NX has multiple video outputs, which can be used simultaneously, and the resolutions can be
configured independently.
Full Broadcast SDI Format and Standard
Full Format
1920 x 1080P 60/59.94/50/30/29.97/25
1920 x 1080i 60/59.94/50
1280 x 720P 60/59.94/50
SDI Standard
SMPTE 292M
SMPTE 296M (1.5Gb/s)
SMPTE 424M
SMPTE 274M
SMPTE 425-A (3Gb/s) with SMPTE352 SDI Metadata Supported
NDI Video Streaming Formats
1920 x 1080P 60/59.94/50/30/29.97/25
1280 x 720P 60/59.94/50
3G-SDI Out
Follow these steps to connect to the camera:
Connect the SDI Cable – Plug one end of a properly rated SDI cable into one of the camera’s two SDI1.
outputs. Make sure the BNC connector is securely fastened to prevent it from coming loose during use.
Connect the other end to your desired device, such as a switcher, video router, converter, or display.
Power On the Camera – Turn on the camera and allow it to initialize. Once ready, the video feed will2.
appear on the screen. For the first five seconds, the camera’s initial settings will be displayed.
Bekijk gratis de handleiding van Bolin Technology EX1030NX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bolin Technology |
| Model | EX1030NX |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 9560 MB |
