Bolin Technology EX1030H handleiding
Handleiding
Je bekijkt pagina 35 van 39
Enter the FTP server’s port number into the ‘Server Port’ field. This should match the port configured on3.
the FTP server, typically port 21.
Enter the FTP server’s username and password into the ‘Server Username’ and ‘Server Password’ fields,4.
respectively. These credentials should match those configured on the FTP server.
Choose the ‘Path Type’ and ‘Path’ where you want the snapshot to be saved on the FTP server.5.
Tracking Data Output
Enable Tracking Data Output: Toggle the switch at the top to Enable tracking data output. Once enabled, you'll
be able to configure the rest of the settings.
Destination IP Address: Input the IP address where the tracking data will be sent.
Set UDP Port Number: Input the UDP Port Number through which the data will be transmitted. Valid range:
1025 - 65535
Transfer Mode: Select how often the tracking data should be sent.
Camera ID: To identify the camera when sending tracking data. Values between 0 - 255, and the default is
255.
System
Firmware
Bekijk gratis de handleiding van Bolin Technology EX1030H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bolin Technology |
| Model | EX1030H |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 9433 MB |
