Bolin Technology EX1030H handleiding
Handleiding
Je bekijkt pagina 16 van 39
Live View interface. The numbered items below correspond to key functions:
Stream Selection – Toggle between the Main Stream and Sub Stream for monitoring different video1.
qualities.
Snapshot Button – Capture a still image from the live feed.2.
Menu Button – Opens the on-screen display (OSD) menu for additional camera settings.3.
OSD Menu Options:
EXPOSURE: Adjust brightness, shutter speed, and gain.
WHITE BALANCE: Configure color correction settings.
PICTURE: Modify contrast, sharpness, and other image properties.
GAMMA: Fine-tune gamma correction.
LENS: Control lens-related settings.
PAN TILT: Adjust pan/tilt behavior.
SYSTEM: Configure network and operational settings.
STATUS: View camera diagnostics and system information.
PTZ Controls – Allows manual pan, tilt, zoom, and focus adjustments.4.
Roll Control & Image Quality Mode – Adjust image roll angle and toggle between Super Fine or Standard5.
quality.
Speed Settings – Customize pan/tilt, zoom, and focus movement speeds for precise control.6.
PTZ Presets & Auto Scanning – Access preset positions or start/stop auto-scanning patterns.7.
Creating and Recalling Presets
To save presets, the user should adhere to the following steps:
Utilize the PTZ controls of the web interface, IR controller, or a PTZ controller to adjust the camera to the1.
position(s) they wish to save as a preset.
After positioning the camera, click on the ‘Create’ button. Subsequently, select the preset number under2.
which they want to save this setting. Label the preset in the ‘Name’ field and click ‘Save’.
To recall a preset, select the preset number on the Web Interface and click the “Go” button.3.
A saved preset can also be deleted by selecting it and clicking on the Delete button.4.
In the Preset section of the camera's web interface, you'll find several configuration options to optimize
performance for different conditions. Here’s an overview:
58 Night Mode (Set) / Day Mode (Call): Activate Night Mode to enhance visibility in low-light conditions or
switch to Day Mode for standard daytime operation.
59 Auto Day/Night (Call): Automatically toggles between day and night modes based on ambient light
levels.
61 Defog OFF (Set) / ON (Call): Enables or disables the defogging feature to clear mist or fog from the
lens.
62 Sngl. Wiper ON (Set) / OFF (Call): Activates a single wipe to remove debris or water from the lens; can
be turned off when not needed.
63 Heater OFF (Set) / ON (Call): Controls the built-in heater, preventing freezing in cold environments.
Bekijk gratis de handleiding van Bolin Technology EX1030H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bolin Technology |
| Model | EX1030H |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 9433 MB |
