Bolin Technology EX1030H handleiding
Handleiding
Je bekijkt pagina 11 van 39
NOTE: Factory-Default Camera Network Settings
Static IP Address: 192.168.0.13
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1
To change these settings, refer to the Web Interface Configuration section of this guide.
Video Output
The EX1030H has multiple video outputs, which can be used simultaneously, and the resolutions can be
configured independently.
3G-SDI Out
Follow these steps to connect to the camera:
Connect the SDI Cable – Plug one end of a properly rated SDI cable into one of the camera’s two SDI1.
outputs. Make sure the BNC connector is securely fastened to prevent it from coming loose during use.
Connect the other end to your desired device, such as a switcher, video router, converter, or display.
Power On the Camera – Turn on the camera and allow it to initialize. Once ready, the video feed will2.
appear on the screen. For the first five seconds, the camera’s initial settings will be displayed.
Adjust Output Settings – Use the OSD (On-Screen Display) menu or the web interface to configure the3.
output resolution and frame rate. For detailed instructions, refer to the Web Interface
Configuration
section of this guide.
NOTE: It is recommended to use a high-quality, shielded SDI cable rated for the required
resolution and transmission distance to ensure optimal signal integrity and reliability.
SDI Standard Bandwidth Resolution Supported
SD-SDI 270 Megabits/Second 480i
HD-SDI 1.485 Gigabit/Second 720p / 1080i
3G-SDI 2.970 Gigabit/Second 1080P, 60FPS
IP Stream Out
The camera’s IP stream(s) can be enabled and configured through its web interface. To access the web
interface, the camera must be connected to a Local Area Network (LAN) using a CAT6 cable, either through a
network switch or directly to a computer. Streaming from the camera also requires an active internet (WAN)
connection.
Follow these steps to set up IP streaming:
Connect the Camera to the Network – Plug one end of a CAT6 cable into the camera’s LAN/PoE++ port1.
Bekijk gratis de handleiding van Bolin Technology EX1030H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bolin Technology |
| Model | EX1030H |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 9433 MB |
