Bolin Technology D2-220H handleiding
Handleiding
Je bekijkt pagina 6 van 53
6
D
Flo
Warnings:
o If the product does not work properly, please contact your dealer. Never attempt to
disassemble the camera yourself. (We will not assume any responsibility for problems
caused by unauthorized repair or maintenance.)
o This installation should be made by a qualified service person and should conform to all
the local codes.
o When shipping, the camera should be packed in its original packaging.
o Make sure the power supply voltage is correct before using the camera.
o Do not drop the camera or subject it to physical shock.
o Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth
with a bit of ethanol and wipe it gently. If the camera will not be used for an extended
period of time, put on the lens cap to protect the sensor from dirt.
o Do not aim the camera lens at the strong light such as sun or incandescent lamp. The
strong light can cause fatal damage to the camera.
Maintenance Precautions:
o If there is dust on the front glass surface, remove the dust gently using an oil-free brush
or a rubber dust blowing ball.
o If there is grease or a dust stain on the front glass surface, clean the glass surface
gently from the center outward using anti-static gloves or an oil-free cloth. If the grease
or the stain still cannot be removed, use anti-static gloves or an oil-free cloth dipped
with detergent and clean the glass surface gently until it is removed.
o Do not use organic solvents, such as benzene or ethanol when cleaning the front glass
surface.
Regulatory Compliance
FCC Part 15
This equipment has been tested and found to comply with the limits for digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
This product complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1.This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation.
Bekijk gratis de handleiding van Bolin Technology D2-220H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bolin Technology |
| Model | D2-220H |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 12576 MB |
