Bolin Technology D2-220H handleiding
Handleiding
Je bekijkt pagina 18 van 53
18
D
Flo
Audio IN
The D2-210H is equipped with a 3.5 mm MIC/LINE audio input
jack on the rear panel. A microphone or audio source can be
directly connected to feed audio into the camera. You can select
Audio ON/OFF and the input type (MIC / LINE) using the
IR remote control Menu (OSD) under SYSTEM.
Note: With the D2-220H, you can use an USB to 3.5 mm audio jack adapter (not
included), to bring audio into the camera. If the MIC audio input type is selected,
you can also set Plugin Power to ON, so that the camera can supply power to the
connected microphone. The power supply voltage is 2.5V. The audio input is
embedded with the camera HDI/SDI and Dante AV video signal.
Camera Initial OSD Information
Information about the camera’s initial setting status will display for 5 seconds upon power.
1. Camera PELCO ID for RS-485 control
2. Camera ID for IR Remote Control
3. Display Info (On/Off)
4. Audio On/Off
5. Preset Settings
6. Factory Reset
7. Tally Mode On/Off
8. Reload Preset 1 On/Off
9. Video Format Setting
10. SV Number
PELCO ID 001
IR-RECEIVE ON
DISPLAY INFO ON
AUDIO ON
PRESET SETTINGS
FACTORY RESET
TALLY MODE OFF
RELOAD PRESET 1 ON
VIDEO FMT 1080p60
SV: V0A170B44040AD1T5
Camera Status Info Display
D2- 210H Camera
Bekijk gratis de handleiding van Bolin Technology D2-220H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bolin Technology |
| Model | D2-220H |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 12576 MB |
