Bolin Technology Blue Line B7-220 handleiding

Bewakingscamera

Bolin Technology

33 pagina's

PDF beschikbaar

Handleiding

Use RS-232 (VISCA)

The RS-232 port can be utilized to connect to optional controllers, such as a joystick control keyboard or a control PC station, for camera operation.

With the joystick of the control keyboard, pan/tilt and zoom operations can be performed. Preset operations can be executed using the control buttons.

For operation via a PC station, application software that supports this unit is required.



RS232 Connection

1. The RS232 control method is set on the Real panel Dip Switch.

2. The Baud Rate on the Bottom Dip Switch is set to match the Baud Rate setting on the keyboard in use.

3. The specic camera address to control the camera is set on the Bottom Dip Switch.

4. To have the camera address automatically assigned by the VISCA controller, the camera Dip Switch address is set to 0.

5. The camera is rebooted by turning it Off/On after the Bottom Dip Switch has been correctly set up.

. The camera supports Daisy Chain connection for up to 7 cameras.

7. An RJ45 to RS232 (VISCA) control cable is used. The controller must be VISCA compatible.

. An RS232 connection cable can be created with the following applications:

9. Use extension cables included RJ45 to RS232 8 pin Mini Din adaptor to make RS232 connection for your control device.

10. Use extension cables included RJ45 to RS422/232 Phoenix terminal contact adaptor to make RS232 connection for your control device.

11. Or you can use CAT5/6 network cable (T-568B standard pinout) to make RS232 connection by following the pin denition below:

12. How to make RS232 Daisy Chain multiple camera connection with standard RS232 serial port controller as below:



Use RS-422(VISCA) / RS485 (PELCO P/D)

You can use RS-422/485 port connect to optional controllers, such as joystick control keyboard, control PC station, to operate the camera.

To perform pan/tilt and zoom operations using the joystick of the control keyboard, and to perform the Preset operation using the control buttons.

An application software that supports this unit is needed if you use PC station.



RS-422 Serial Commands (VISCA)

The camera is equipped with an RS-422 port, which facilitates VISCA control over serial commands. This RS-422 port is also compatible with RS-485. The camera

can be connected via a serial connection to a PTZ controller or a computer. This allows for the execution of pan, tilt, and zoom operations, as well as the

performance of preset recalls.



CAUTION:

When one connects the camera via serial to a Sony PTZ controller, it differs from the process with a non-Sony PTZ controller. It is crucial

to verify the pin settings for the specic controller in use.

1. The camera should be powered on, and the OSD menu should be opened or the Web Interface should be logged into using any web browser. Proceed to the

system settings and adjust the baud rate to match that of the controller. The VISCA ID should be set to a number between 1 and 7.

2. A standard terminated CAT5 or CAT6 cable can be used to directly connect the camera to the controller. Alternatively, the included RJ45 to RS422 Control

Cable Adapter can be used to connect unterminated CAT5/CAT6 cables between the camera and controller. The pin connection diagrams provided below

should be followed, taking into account the specic controller in use and the desired connection.



Use RS-422 (VISCA) / RS485 (PELCO P/D)

For camera operations, the RS-422/485 port can be utilized to connect controllers, such as a joystick keyboard or a PC station. This allows for the effortless

management of pan, tilt, and zoom functions, as well as access to all preset functions using the controller’s buttons.

To operate a PC station, it is essential to have a software application that is compatible with this unit.



Bekijk gratis de handleiding van Bolin Technology Blue Line B7-220, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.