Bolin Technology BC-9-4K12S-S6MN handleiding
Handleiding
Je bekijkt pagina 36 van 62
36
DIP SWITCH SETTINGS
The Dip switch is for setting the camera configuration for following items:
1. Camera ID Address for VISCA protocol
2. Video color space
3. RS-232 / RS-422 control method selection
4. RS-232 / RS-422 baud rate selection
Setting of the DIP Switches
Turn off power to the camera before changing the DIP switch settings.
Power on the camera to have the new Dip Switch setting activated.
From the above list, No.1 Camera ID address, NO.2 Video color space, NO.5 Baud rate setting can be set in
camera OSD menu as well. The camera takes either the way of OSD menu setting or the way of DIP switch
setting. They override each other. After the camera is turned on, the camera takes the last setting before it is
turned on, either set through the OSD or Rear DIP switch.
The DIP Switch Settings
Bit 1~3: Camera Address setting for VISCA protocol
Bit 4: Video Color Space
Bit 5: Reserved
Bit 6: RS-232/RS-422
Bit 7~8: RS-232/RS-422 Baud Rate
Bekijk gratis de handleiding van Bolin Technology BC-9-4K12S-S6MN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bolin Technology |
| Model | BC-9-4K12S-S6MN |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12196 MB |