Bolin Technology B6-420 handleiding

Bewakingscamera

Bolin Technology

33 pagina's

PDF beschikbaar

Handleiding



NOTE

Indicates useful or supplemental information about the use of the product.



Safety Information



WARNING:

Installation and removal of the unit and its accessoriesmust be carried out by qualied personnel. You must read all of the Safety Instructions supplied with your

equipment before installation and operation.



• If the product does not work properly, please contact your dealer. Never attempt to disassemble the camera yourself. (We will not assume any responsibility for

problems caused by unauthorized repair or maintenance.)

• This installation should be made by a qualied service person and should conform to all the local codes.

• When shipping, the camera should be packed in its original packaging.

• Make sure the power supply voltage is correct before using the camera.

• Do not drop the camera or subject it to physical shock.

• Do not touch sensor modules with ngers. If cleaning is necessary, use a clean cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an

extended period of time, put on the lens cap to protect the sensor from dirt.

• Do not aim the camera lens at the strong light such as sun or incandescent lamp. The strong light can cause fatal damage to the camera.



Maintenance Precautions:

• If there is dust on the front glass surface, remove the dust gently using an oil-free brush or a rubber dust blowing ball.

• If there is grease or a dust stain on the front glass surface, clean the glass surface gently from the center outward using anti-static gloves or an oil-free cloth. If

the grease or the stain still cannot be removed, use anti-static gloves or an oil-free cloth dipped with detergent and clean the glass surface gently until it is

removed.

• Do not use organic solvents, such as benzene or ethanol, when cleaning the front glass surface.



Regulatory Compliance

FCC Part 15



This equipment has been tested and found to comply with the limits for digital devices, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his

own expense.



This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:



This device may not cause harmful interference.



This device must accept any interference received, including interference that may cause undesired operation.



LVD/EMC Directive

This product complies with the European Low Voltage Directive 2006/95/EC and EMC Directive 2004/108/EC.

WEEE Directive–2002/96/EC

The product this manual refers to is covered by the Waste Electrical & Electronic Equipment (WEEE) Directive and must be disposed of in a

responsible manner.



What's In The Box



B6 Series Indoor PTZ Camera (B6-420)

IR Remote Controller (VCC-RC-2)

RS422/232 RJ45 Adapter (VCC-CC45RS)

Bekijk gratis de handleiding van Bolin Technology B6-420, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.