Bolin Technology B6-420 handleiding

Bewakingscamera

Bolin Technology

33 pagina's

PDF beschikbaar

Handleiding

Within thePTZ Settingdrop-down menu, the user will discover the following options:

1. Auto-Scanning: The camera image pans automatically from left to right or right to left at a speed dened by the user (Speeds 1-8).

2. Preset: The user can set and recall up to 64 camera presets (The camera supports saving a total of 255 presets). These presets can be recalled through the

web interface, IR Remote, or PTZ Controller.

3. Tracking: The camera will record a series of presets that are recalled in a specied order.

4. Scanning: The camera image pans from left to right or right to left between up to 12 points dened by the user at a speed also dened by the user (Speeds 1-

8).

5. Power On Action: Users can dene a set of actions that a camera performs (preset recall, scan, trace, or cruise) once powered on.

. Cruise: The camera will record a series of movements that an operator makes, which can then be recalled whenever a user prefers.

Creating and Recalling Presets

To save presets, the user should adhere to the following steps:

1. Utilize the PTZ controls of the web interface, IR controller, or a PTZ controller to adjust the camera to the position(s) they wish to save as a preset.

2. After positioning the camera, click on the ‘Create’ button. Subsequently, select the preset number under which they want to save this setting. Label the preset

in the ‘Name’ eld and click ‘Save’.

3. To recall a preset, select the preset number on the Web Interface and click the “Go” button.

4. A saved preset can also be deleted by selecting it and clicking on the Delete button.



Adjusting OSD Menu Settings from the Web Interface

The OSD Menu settings can be accessed and adjusted from the Web Interface. On the “Live View” page, locate and click the “Menu” icon situated at the bottom

right of the live view image to display the OSD menu. The user can navigate through these settings using the arrows under “Pan/Tilt Control”. The middle button is

used to select, and the right arrow button is used to modify the setting. To exit this menu, simply click on the “Menu” icon again. The settings available in this

menu encompass:

Adjust Exposure, White Balance, Picture (Noise Reduction, E-Flip, ND Filter, IR Filter), Gamma, Lens (Focus, Stabilization), Pan & Tilt, Genlock, System (Pelco,

Visca, IR, Baud Rate, Tally, Audio, Video Format) settings, and view System Status.

SETTINGS -FAST SETTINGS

This section provides quick access to frequently used settings. The Fast Settings page has four tabs: Device, Network, Codec, and User. For more information

about these settings, please refer to the corresponding section in this user guide.

Bekijk gratis de handleiding van Bolin Technology B6-420, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.