Bolin Technology B6-420 handleiding

Bewakingscamera

Bolin Technology

33 pagina's

PDF beschikbaar

Handleiding

information, refer to the Keyboard Controller user guide.)

2. Established a Tally/Contact Function cable connection between the Keyboard Controller and the Video Switcher (Sony).

1. On the keyboard side, connect pins 1-8. On the Video Switch side, connect pins 1-9, excluding pin 8.

2. Link keyboard pin 8 with video switch pin 9.

3. Connect keyboard pin 1 to video, switch pin 1, pin 2 to pin 2, and continue similarly (you can decide the rest based on the pattern), ensuring pin 7 is connected

to pin 7.



Set Up

1. GPI I/O Input Mode for Tally Signal from Video Switch:



a. Connect the camera to the keyboard using a standard RS-422 control cable.

b.Establish a connection between the keyboard and the video switch using a tally function cable.

c. Navigate to KEYBOARD SETTING > GPI I/O > Setting, and switch it to Input mode. Exit to the home directory.

d. After completing the above steps, you can switch between cameras using the video switch. For instance, selecting camera 1 on thevideo switch sends a tally

signal to the keyboard via the tally function cable. The keyboard then transmits this tally signal to camera 1 through the standard RS-422 control cable, activating

camera 1's tally light. The keyboard can now control camera 1's pan and zoom.

e. If you switch to camera 2 on the video switch, the tally light for camera 2 will turn on, and the tally light for camera 1 will turn off.



2. GPI I/O Output Mode for Tally Signal Sent by Keyboard Controller:

a. Connect the camera to the keyboard using a standard RS-422 control cable.

b. Navigate to KEYBOARD SETTING > GPI I/O > Setting, and switch it to Output mode. Exit directly to the home menu.

Bekijk gratis de handleiding van Bolin Technology B6-420, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.