Bolin Technology B6-420 handleiding

Bewakingscamera

Bolin Technology

33 pagina's

PDF beschikbaar

Handleiding

4. Congure the controller's IP address and related network settings to properly communicate with your network and PTZ camera. Then enter the camera's IP

address and VISCA over IP port settings into the controller to access the camera.



NOTE:



Factory-Default Camera Settings for control of VISCA over IP

Static IP Address: 192.168.0.13

Subnet Mask: 255.255.255.0

Gateway: 192.168.0.1

VISCA over IP Control Port: 52381

To change these settings, refer to the Web Interface Conguration section of this guide.

NOTE:

The VISCA over IP port of the controller MUST be set to 52381 to communicate with and control the camera.



ONVIF Protocol

Can be easily integrated with other ONVIF compliant devices and systems. This allows for greater exibility and ease of use, especially withsetups that involve

multiple devices and systems.



ONVIF 2.4 (Prole S)

ONVIF Port: 2000



Audio Input

HDMI/SDI/USB and IP video streaming signal has high-quality audio streaming embedded with support for Mic-in and Line-in audio input.



The B6-420 model is designed with a 3.5 mm MIC/LINE audio input jack on its rear panel. This allows for a direct connection of a microphone or an audio source

to the camera for audio input. The IR remote control can be used to navigate to the ‘SYSTEM’ menu on the OSD. From this menu, the audio can be turned ON or

OFF and the input type can be selected as either MIC (for microphone) or LINE (for other audio sources).



Tally Light

Tally Light GPI I/O connection

The camera is equipped with two tally lights, serving as visual indicators. When illuminated, these lights signal that the camera is actively operational. One front

Tally light improves visibility, and an additional tally light positioned behind the camera block improves rear visibility. To activate the camera's Tally Light function,

you need a video switch and a keyboard (not included).



GPI connection with RS422 VISCA control connection

Cable Conguration:

1. Set up a standardized RS-422 daisy chain control connection to seamlessly control multiple cameras from the keyboard controller. (For detailed RS422 control

Bekijk gratis de handleiding van Bolin Technology B6-420, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.