Body Solid Endurance CL300 handleiding
Handleiding
Je bekijkt pagina 9 van 40
Assembly Instruction
9
Assembly of the CL300 takes professional installers about 1/2 hour to complete. If
this is the rst time you have assembled this type of equipment, plan on signicantly
more time.
Professional installers are highly recommended!
However, if you acquire the appropriate tools, obtain assistance, and follow the
assembly steps sequentially, the process will take time, but is fairly easy.
ASSEMBLY TIPS
Read all “NOTES” on each page before beginning each step.
While you may be able to assemble the CL300 using the illustrations only, important safety
notes and other tips are included in the text.
Some pieces may have extra holes that you will not use. Use only those holes indicated in
the instructions and illustrations.
NOTE: To nd out the length of a particular bolt, measure its shank (the long, narrow part
beneath the head).
Refer to the following diagram:
Do not fully tighten bolts until instructed to do so.
NOTE: After assembly, you should check all functions to ensure correct operation. If you
experience problems, rst recheck the assembly instructions to locate any possible errors
made during assembly. If you are unable to correct the problem, call the dealer from whom
you purchased the machine or call 1-800-556-3113 for the dealer nearest you.
Bekijk gratis de handleiding van Body Solid Endurance CL300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Body Solid |
| Model | Endurance CL300 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4431 MB |
