Blustream SM11EARC-8K handleiding
Handleiding
Je bekijkt pagina 6 van 12
SM11EARC-8K USER MANUAL
06 www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk
The SM11EARC-8K can be configured to perform various tasks using the Mode dip-switches. For details on
each setting please see below:
Note: You must power cycle the product aer making MODE changes.
Dip-switch 3 - Hotplug Mode ON / OFF
When Hotplug mode is turned OFF the SM11EARC-8K will use the HPD of the connected display on the HDMI output.
When Hotplug mode is turned ON the SM11EARC-8K will complete the HPD back to the source connected to the HDMI input, no
longer requiring a HPD from a connected display.
Turning on HPD in the SM11EARC-8K can be beneficial in 2 ways:-
1) Audio de-embedding is required but no display is available. The SM11EARC-8K will act as the HDMI end-point completing
the necessary HDMI handshake, allowing the HDMI source to output a signal.
2) The SM11EARC-8K will act as the HDMI end-point completing the necessary HDMI handshake which can help resolve any
handshake issues that may be associated with the display connected to the HDMI output of the SM11EARC-8K.
Position = 0 (up) - HPD (hot plug detect) o
Position = 1 (down) - HPD on
Dip-switch 2 - HDCP Bypass or Conversion
The SM11EARC-8K can be used to help resolve HDCP issues.
Position = 0 (up) - HDCP management mode
Position = 1 (down) - HDCP bypass mode
Please note: the SM11EARC-8K does not remove HDCP from the HDMI signal path
Dip-switch 1 - Audio embedding
The SM11EARC-8K can be used to embed audio onto the HDMI output signal.
Position = 0 (up) - HDMI input audio pass-through (no audio embedding)
Position = 1 (down) - Audio embedding (2ch L/R audio input added to the HDMI video out)
Dip-switch 0 - Audio De-embedding
The SM11EARC-8K can be used to de-embed audio from either the the HDMI input signal or the ARC/eARC signal from the HDMI
output.
Position = 0 (up) - Audio de-embedding from the HDMI input signal (HDMI source device)
Position = 1 (down) - Audio de-embedding from the ARC/eARC HDMI output signal (supported HDMI display)
Note - Source input signal must be PCM 2ch audio for analogue audio outputs to work.
The SM11EARC-8K does not downmix multi-channel audio signals.
Mode DIP Switch Settings
Bekijk gratis de handleiding van Blustream SM11EARC-8K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blustream |
| Model | SM11EARC-8K |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1003 MB |
