Blustream MX44AVW handleiding
Handleiding
Je bekijkt pagina 21 van 31
MX44AVW USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk
21
General Settings (continued)
– IR Control ON / OFF
– Telnet ON / OFF
– SSH ON / OFF
– Web Page ON / OFF
WARNING: Setting the Web Page to OFF will disable the web-GUI; it can only be re-enabled by using the API
– HTTPS ON / OFF
– Telnet Port Default: 23
– SSH Port Default : 20
– RS-232 Baud Rate 9600 / 19200 / 38400 / 57600 / 115200
– Fan Auto / Always On / Always O
WARNING: Setting the fan to ‘Always O’ is not recommended
Press the Update button at the bottom of the sub menu to apply changes.
Domain Name:
Where the IP address of the MX44AVW is not known, the Domain Name can be used to connect to the web-GUI. By default this is
set to mx44avw.local
The Update button will open a sub menu to configure the following option:
– Domain Name Alphanumeric characters, no spaces
Press the Update button at the bottom of the sub menu to apply any changes; the updated domain name will be displayed.
Control Network:
Network settings for the connected TCP/IP port can be configured from this sections. The Update button will open a sub menu to
configure the following items:
– DHCP ON / OFF
– IP Address Manually assign the IP Address of the MX44AVW, disabled if DHCP is on
– Subnet Mask Manually set the Subnet Mask, disabled if DHCP is on
– Gateway Manually set the Gateway, disabled if DHCP is on
Bekijk gratis de handleiding van Blustream MX44AVW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blustream |
| Model | MX44AVW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3661 MB |
