Blustream Dante IP350UHD-RX handleiding
Handleiding
Je bekijkt pagina 3 van 4
IP Multicast HDMI2.0 Video Receiver with Dante
®
IP350UHD-RX
Description
The Blustream IP300 series Multicast distribution platform allows virtually
latency free (1 frame) distribution of 4K HDMI video over a 1Gb managed
network.
Featuring full interoperability with the IP300UHD product line, the
IP350UHD-RX is an industry leading Dante enabled 4K HDCP 2.2 HDMI
receiver that, using visually lossless compression technology, delivers
18Gbps HDMI, Dante & AES67 audio, bi-directional IR, RS-232 & USB/KVM
up to lengths of 100m over standard copper network architecture, or greater
distances using the in-built bre SFP network interface.
The IP350UHD-RX can support both video and Dante audio distribution
from a single network. A second RJ45 connection allows for the Dante
audio network interface to be segregated from the video over IP network
if required.
With a full 18Gbps HDMI scaling chipset on-board, the HDMI output can
be adjusted to lower resolutions where legacy displays are required in the
same system as full 4K. The scaling capabilities of this unit also allow for
videowalls to be created where needed.
The unit can be powered via PoE from the network switch, or locally should
the switch not support PoE.
With multiple conguration options available, the exibility of the Blustream
Multicast video over IP solution makes this platform ideal for multiple
installation types.
Key Features
•
Advanced 4K HDMI 2.0 video over 1Gb managed network
supporting 18Gbps HDMI signals
• Virtually unlimited system size
• Extends HDMI up to a distance of 100m over a single CAT cable
• SFP port for signal distribution over bre
• Supports up to 4K UHD 60Hz 4:4:4
• Supports HDR including Dolby Vision LLM
• Supports all known HDMI audio formats including Dolby Atmos,
Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
transmission
• Extends HDMI and Dante up to a distance of 100m over a single
CAT cable
• Dual RJ45 network ports congurable for independent or
combined HDMI and Dante signal distribution
• SFP port for independent or combined HDMI and Dante signal
distribution over a single bre cable
• Advanced signal management for independent routing of IR,
RS-232, USB/KVM, audio and video
• PoE (Power over Ethernet) to power Blustream unit from PoE
switch
• HDCP 2.2 compliant with full 18Gbps scaling capabilities for
inclusion of non-4K / legacy displays whilst distributing 4K to
other parts of the system
• Analogue L/R audio output supports both balanced and
unbalanced audio signals
• HDMI ARC, eARC or optical audio return from display to an
IP300UHD or IP350UHD transmitter
• Optical (S/PDIF) input for 2ch optical audio return that can be fed
into Dante network
• OLED front panel display for advanced system information and
manual conguration
• Optional 24V power supply (should Ethernet switch not support
PoE)
• Compatible with Blustream IP300UHD-TX and IP350UHD-TX/RX
products
• Features 4 operational modes:
- Matrix distribution (requires 1Gb network switch)
- Video wall (requires 1Gb network switch)
- One-to-one HDMI extender (no network switch required)
- One-to-many HDMI extender (no network switch required)
Blustream cannot be held responsible for errors in typography or photography. Specications are subject to change without notice.
25mm
190mm
LAN 1 / PoE LAN 2 SFP HDMI OUT OPT IN
AUDIO OUT
24V 1A
IP350UHD-RX
IP350UHD-RX
1 USB 2 IR IN IR OUT
RESET
RS-232
RX TX
DEBUG
ON OFF
Multicast 18Gbps UHD Receiver with Dante
®
Bekijk gratis de handleiding van Blustream Dante IP350UHD-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blustream |
| Model | Dante IP350UHD-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1383 MB |
