Blustream Dante DA11AEN-V2 handleiding
Handleiding
Je bekijkt pagina 2 van 4
02
DA11AEN-V2 QUICK REFERENCE GUIDE
www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk
Dante Controller soware is required in order to setup and configure the DA11AEN-V2 as well as control your Dante®
network. Audinate provide extensive training videos and documentation on their website. This can be found here:
http://www.audinate.com/products/soware/dante-controller
Upon connecting your DA11AEN-V2 to a compatible network, the Dante Controller soware should automatically
discover the device. The DA11AEN-V2 will appear in the Dante Controller with a name denoted with “DA11”. On the
“Routing” screen you can create audio routing between Dante® encoders and decoders in your system.
Please ensure your PC is on the same network as your Dante devices. Dante is not able to transmit over WiFi and it is
recommended to hardwire into the Dante network. Having multiple network devices enabled can also confuse the
Dante Controller soware so it is recommended to disable WiFi during configuration.
Dante Controller
It is also possible to change the settings of the DA11ADE-V2 under the “Device Info” screen in the Dante Controller
soware. To do so, select the “Device Config” menu.
Here we can adjust the sample rate of the DA11ADE-V2. Please Note: that Dante® products can only transmit or
receive audio from other Dante® products that are set up with the same sample rate. A mismatch in sample rate may
stop audio from transmitting.
Under the “Device Config” screen we can also adjust the latency of the DA11AEN-V2 from 2-10 milliseconds.
Bekijk gratis de handleiding van Blustream Dante DA11AEN-V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blustream |
| Model | Dante DA11AEN-V2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 844 MB |
