Blustream Dante DA11ABL-WP-EU-V2 handleiding

Niet gecategoriseerd

Blustream

22 pagina's

PDF beschikbaar

Handleiding

DA11ABL-WP-EU-V2 PRODUCT MANUAL

Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk

Web-GUI - Log In and Initialisation

The following pages will take you through the operation of the unit’s web-GUI. You must connect a TCP/IP RJ45 socket to your

local network, or directly from your computer to the DA11ABL-WP-EU-V2, in order to access the product’s web-GUI.

By default, the unit is set to DHCP; however, if a DHCP server (eg: network router) is not installed, the unit will receive an IP

address in the 169.254.xxx.xxx range.

If the IP address of the DA11ABL-WP-EU-V2 is not known, it can be found by:

– Dante® Controller

– Using a 3rd party IP scanning tool

– Using the default hostname address: da11abl-wp-eu-v2.local

Due to updated password regulations, the login details for the web-GUI will dier based on the firmware version:

If the DEP firmware version is equal to or below V1.3.1.1, the following credentials will be utilised:

Default Username: blustream Default Password: 1234

If the DEP firmware version is equal to or above V1.3.3.5, the following credentials will be utilised:

Default Username: blustream Default Password: @Bls1234

When initially accessing the web-GUI of the DA11ABL-WP-EU-V2, the Login page is shown as below.

Bekijk gratis de handleiding van Blustream Dante DA11ABL-WP-EU-V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.