Blustream Dante DA11ABL-WP-EU-V2 handleiding
Handleiding
Je bekijkt pagina 5 van 22
DA11ABL-WP-EU-V2 PRODUCT MANUAL
05
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk
Operation and Connections
The DA11ABL-WP-EU-V2 is initially configured with the Dante® Controller app. Connect the Dante® port to a PoE powered Dante®
network. If PoE is not available, the unit can be powered via the Phoenix power port.
Dante® Controller
The Dante® Controller soware is required in order to setup and configure the DA11ABL-WP-EU-V2 as well as control a Dante®
network. Audinate provide extensive training videos and documentation on their website, which can be found here:
http://www.audinate.com/products/soware/dante-controller
Upon connecting the DA11ABL-WP-V2 to a compatible network, the Dante® Controller soware should automatically discover the
device. The DA11ABL-WP-V2 will appear in the Dante® Controller as ‘DA11ABL-WP-EU-V2-xxxxxx’. On the Routing tab, audio can be
routed as a matrix between Dante® transmitters and receivers in your system.
By default, the DA11ABL-WP-EU-V2 is shipped with the network settings set to obtain an IP Address automatically on the Dante®
port. This means that if a DHCP server is present on the network, the DA11ABL-WP-EU-V2 will be provided with an IP Address. If no
DHCP server is present, then the DA11ABL-WP-EU-V2 will receive a default IP Address in the 169.254.xxx.xxx range.
Bekijk gratis de handleiding van Blustream Dante DA11ABL-WP-EU-V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blustream |
| Model | Dante DA11ABL-WP-EU-V2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2451 MB |
