Blustream BLUARC handleiding
Handleiding
Je bekijkt pagina 16 van 23
BLUARC USER MANUAL
www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk16
Web-GUI - System (continued)
Trigger
Enables/Disables the trigger port. The trigger port can be configured as an Input or an Output when connected to a third-party
control product. Event’s can be specified when to send a signal, or to occur when a signal is received.
Input
Sets the trigger port as an input. The following events can be selected from the dropdown menu to be executed when an external
trigger input signal is detected on the trigger port:
– Default (None) No action
– BT TX On (TV Speaker O) This will connect Bluetooth transmitter with the Bluetooth paired devices and mute
the audio coming out of the HDMI output 1
– BT TX O (TV Speaker On) This will disconnect Bluetooth transmitter with the Bluetooth paired devices and
unmute the audio coming out of the HDMI output 1
– System Power On Or O This will switch the power status of the BLUARC between power on and power o.
It allows third party trigger control of the BLUARC. When the BLUARC is powered o,
there is no signal or 5V on the HDMI outputs
Output
Sets the trigger port as an output. The following events can be selected from the dropdown menu to send a signal from the
trigger port when the selected event occurs:
– Default (None) Disable trigger output
– Paired Devices Connection Change Bluetooth transmitter paired devices connection status change will trigger output
(high or low level)
– System Power Status Change System power status change will trigger output (high or low level)
The input trigger can be configured as Low Level or High Level or Low Pulse or High Pulse:
– Low Level: 0V
– High Level: 5-12V
– Low Pulse: 0V, the duration of 0V must be at least 30ms
– High Pulse: 5-12V, the duration of 5~12V must be at least 30ms
The output trigger can be configured as Low Level or High Level:
– Low Level: 0V
– High Level: 12V
Volume Indicator
Sets which output will be controlled via the front panel buttons. This selection will appear highlighted in Control page of the web-
GUI.
Output Volume Control – via Front Panel/WebGUI/API “VOL +/-”
The analogue output and Bluetooth output volume can be adjusted to increment and decrement by a fixed amount.
The default step value is 3 (volume changes will occur in steps of 3 every time an increment / decrement command is received).
Volume steps can be configured between 1 to 10, resulting in slower/faster changing volume.
Output Volume Control – via CEC
The CEC volume control can be adjusted to increment and decrement by a fixed amount.
The default step value is 3 (volume changes will occur in steps of 3 every time an increment / decrement command is received).
Volume steps can be configured between 1 to 10, resulting in slower/faster changing volume.
Bekijk gratis de handleiding van Blustream BLUARC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blustream |
| Model | BLUARC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2772 MB |
