Blustream ACM500 handleiding
Handleiding
Je bekijkt pagina 2 van 4
ACM500 QUICK REFERENCE GUIDE
02 www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk
Rear Panel Description
1 Power Connection (optional) - use 12V 1A DC power supply where PoE switch does not provide power from Video
LAN switch
2 Video LAN (PoE) - connect to the network switch that the Blustream Multicast components are connected to
3 Control LAN Port - connect to existing network that a third party control system resides on. The Control LAN port is
used for Telnet/IP control of the Multicast system. Not PoE.
4 RS-232 1 Control Port – connect to a third party control device for control of the Multicast system using RS-232.
5 RS-232 2 Control Port – connect to a third party control device for control of the Multicast system using RS-232.
6 GPIO Connections - 6-pin Phoenix connect for input / output triggers (reserved for future use)
7 GPIO Voltage Level Switch (reserved for future use)
8 IR Ctrl (IR Input) – 3.5mm stereo jack. Connect to third party control system if using IR as the chosen method of
controlling the Multicast system. When using the included 3.5mm stereo to mono cable, ensure the cable direction
is correct.
9 IR Voltage Selection - adjust IR voltage level between 5V or 12V input for IR CTRL connection.
Sign In
Before logging in to the ACM500, ensure that the control device (i.e. laptop / tablet) is connected to the same network
as the ACM500’s Control port. To log in, open a web browser (i.e. Firefox, Internet Explorer, Safari etc.) and navigate to
the default (static) IP address of the ACM500 which is:
192.168.0.225
The ACM500 can also be found at the beacon address at:
http://acm500.local
The IP address and/or beacon address can be amended from the web-GUI of the ACM500. Please refer to the full
instruction manual which can be downloaded from the Blustream website.
The Sign In page is presented on connection to the ACM500. The default admin credentials are as follows:
Username: blustream Password: 1 2 3 4
The first time the ACM500 is signed into, you will be prompted to set a new Admin password. Please insert a new
password, confirm your new password, and ensure this is kept safe. The ACM500 will require the unit to be signed into
again using the new Admin password.
1 2 3 4 5 6 7 8 9
Bekijk gratis de handleiding van Blustream ACM500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blustream |
| Model | ACM500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 522 MB |
Caratteristiche Prodotto
| Gewicht | 600 g |
| Breedte | 190.4 mm |
| Diepte | 93 mm |
| Hoogte | 25 mm |
| Soort | AV-zender & ontvanger |
