Blumfeldt SwiftWave handleiding
Handleiding
Je bekijkt pagina 25 van 76
25
EN
OPERATION
• When the switch is turned on, the buzzer sounds and the unit enters
standby mode. The WIFI icon ashes and the display shows the indoor
temperature.
• When you press the ON/OFF buon, the heang icon in the unit and the
low temperature icon will light up at the same me.
• To change the heang cycle, press the Increase or Decrease buon to
make adjustments. The unit can operate in low, high and frost protecon
modes.
• If the ambient temperature is below 5°C, the anfreeze mode is acvated
and the low heat icon is displayed. When the ambient temperature is ≥ 7
°C the heang wire stops heang, the power icon goes out and only the
anfreeze icon is lit.
• Temperature selecon buon: When the number is ashing, the
temperature can be adjusted. Press the increase or decrease buon,
adjust and select the desired temperature within the temperature range
of 5 °C to 50 °C. When the temperature reaches the set temperature,
the unit will stop heang and when the temperature falls below the set
temperature, the unit will start working again.
• Use the mer buons: The display symbol lights up in white. Press the
increment or decrement key to select the desired operang me within
the range of 1 to 24 hours. The machine will stop working when the
preset me is reached.
• Schedule me: In Standby mode, press the temperature selecon buon.
The mer icon will light up. Select from 1 to 24 hours and the appliance
will start when the set me is reached. The set temperature is 25°C, i.e. if
the ambient temperature is below the set temperature, the unit will start
working and if the ambient temperature is above the set temperature, the
unit will go into standby.
• Child lock buon: When you press and hold the increase buon, the
child lock icon lights up. At this me, all buons on the interface are
unavailable. When you press the Increase key again, the child lock icon
will go out, indicang that all the buons on the interface can be used
normally again.
• Window opening funcon: In all heang modes, if a window is opened
and the temperature drops by 5°C or more within 5 minutes, the product
will automacally stop heang and the white indicator in the window
open mode will light up. The window opening funcon icon on the display
will light up. If it is necessary to restore the heang operaon, rst unlock
it (if locked), then press and hold the increment and decrement buons
for 5 seconds to return to the operang mode before opening the
window.
• Pressing and holding the temperature selecon buon for 3 seconds will
access the four preset programme modes: P0/P1/P2/P3. The number
"P0" ashes on the screen. Press the increase and decrease buons and
Bekijk gratis de handleiding van Blumfeldt SwiftWave, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blumfeldt |
| Model | SwiftWave |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6665 MB |
