Blumfeldt SwiftWave handleiding
Handleiding
Je bekijkt pagina 23 van 76
23
EN
INSTALLATION
• Before installaon, check that all parts are complete and that the product
is undamaged.
• If you wish to use the electric heater as a freestanding unit, please aach
the feet supplied with the heater according to the instrucons below.
Ensure that the heater is mounted on a level, stable and clean surface.
Freestanding installaon
1. Place the product upside down
on a so coon cloth or carpet.
2. Aach the feet to the base of
the heater using the screws
provided. Align the holes in
the base with the holes in the
feet, insert the screws through
the holes and ghten with a
screwdriver.
Wall mounted installaon
1. Take 2 brackets, 4 expansion screws and 4 screws out of the box and x
2 brackets to the wall according to the distance between the holes of the
brackets as shown in the picture below.
2. Holding the side of the product, look at the posion of the wall hole on
the back cover and slide the wall to the top of the slot, i.e. the installaon
of the wall is complete, as shown in the picture below.
270
476
Bekijk gratis de handleiding van Blumfeldt SwiftWave, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blumfeldt |
| Model | SwiftWave |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6665 MB |
