Bluetti Handsfree 2 handleiding
Handleiding
Je bekijkt pagina 13 van 32
: Charging : Discharging
The temperature inside the unit is too high.
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
PV Input
Bluetooth Connection
Battery Capacity (SoC)
Power Lifting Mode
Turbo Charging
ECO Mode
Low Battery Alert
Output Power
Output Frequency
Grid Connection
DC Output
AC Output
LCD Instructions
The Handsfree 2 is charging from solar panel(s) or a car.
The Handsfree 2 connects to BLUETTI app via Bluetooth.
The remaining battery capacity.
The Handsfree 2 is operating in Power Lifting Mode.
The Handsfree 2 is charging in Turbo Charging Mode.
The ECO Mode is enabled to save power.
The SoC drops below 5%.
The real-time total output.
The real-time output frequency.
The Handsfree 2 is charging from the home grid.
The DC output is turned on.
The AC output is turned on.
No. Icon Description
When it lights up, the fan is activated and working properly.
If it flashes, there may be a problem with the fan.
Fan Status
①
⑮
⑯
⑭
Charge / Discharge Status
High Temperature Alert
Overload Alert
Charge / Discharge
Remaining Time
The remaining time of charging or discharging.
The Handsfree 2 is drawing too much current, which can
cause damage to the unit or any connected devices.
Overcurrent Alert
The Handsfree 2 is overloaded.
The real-time total input power.
The bar increases during charging and decreases during
discharging.
There's an issue with the Handsfree 2, which may require
troubleshooting or repair.
Input Power
Charge / Discharge Progress
Fault Alert
⑲
⑳
⑰
㉑
⑱
JUST POWER ON 13
Bekijk gratis de handleiding van Bluetti Handsfree 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bluetti |
| Model | Handsfree 2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2563 MB |
