Bluetti Elite 30 V2 handleiding
Handleiding
Je bekijkt pagina 21 van 27
Error Code Description
E001
E002
E003
E033
E039
E065
E067
E068
E085
E086
E087
E088
E115
E116
Others
Solutions
On the Error Code page, the and error code appears simultaneously on the screen.
See the table below for guidance.
10. Troubleshooting & FAQs
• Check device power usage.
• Reduce load if too high.
• Check device power usage.
• Reduce load if too high.
• Wait 10 mins for the unit to cool down.
• Turn on the AC output again.
• Check device power usage.
• Check devices for short circuits.
• Ensure the PV input voltage is within 12V-28V.
• Wait 10 mins for the unit to cool down.
• Re-enable the PV input.
• Check device power usage.
• Check devices for short circuits.
• Wait 10 mins for the unit to cool down.
• Restart your devices.
• Wait for the unit to cool down before charging
it again.
• Place the unit in an ambient temperature
range of 0°C to 40°C (32°F to 104°F).
• Wait for the unit to cool down before using it
again.
• Place the unit in an ambient temperature
range of -20°C to 40°C (-4°F to 104°F).
• Verify home grid frequency.
• Contact utility company if necessary.
• Verify home grid frequency.
• Contact utility company if necessary.
• Contact BLUETTI support for help.
Inverter overload
Inverter overtemperature
protection, AC output off
Inverter short circuit
PV overvoltage
PV overtemperature
DC output short circuit
DC output overcurrent
DC output overtemperature
Charging temperature too high
Charging temperature too low
Discharging temperature too high
Discharging temperature too low
Grid overfrequency
Grid underfrequency
/
JUST POWER ON 21
EN
Bekijk gratis de handleiding van Bluetti Elite 30 V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bluetti |
| Model | Elite 30 V2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2594 MB |
