Bluetti Apex 300 handleiding
Handleiding
Je bekijkt pagina 25 van 33
Turbo Charging
The maximum grid input current is 50A.
• If the unit's SoC falls below 5%, please recharge the unit in time.
• Before storing, charge to 40%-60% SoC, then power off and disconnect all cables.
• Store it in a cool, dry place, away from flammable materials.
• Safe storage temperature: -10°C to 40°C (14°F to 104°F). For storage over a month, keep
it below 35°C (95°F).
• Fully cycle every 3 months to maintain battery health.
• Avoid extended storage; it may impact performance and lifespan.
If SoC drops to 0 during storage or startup:
• Shut down immediately.
• Charge within 48 hours.
• Keep it at 5°C to 35°C (41°F to 95°F) for 6 hours before charging.
• Recommended to charge via an AC source; if using solar energy, ensure an input of
over 100W.
12.Maintenance and Care
Notes:
• Use the BLUETTI app to adjust the grid input current.
• It is recommended that an overcurrent protection device (OCPD) be installed
upstream. A model rated at 60A, 2-pole, 120/240VAC is suggested to ensure the
safety and stability of the circuit.
• It's recommended to consult a licensed electrician to confirm your home circuit
can support the required current.
• To achieve a grid input current exceeding 15A, the NEMA L14-50P to P050A cable
must be purchased separately.
• The Standard AC charging cable and the NEMA L14-50P to P050A cable cannot
be connected simultaneously to charge the device.
NEMA L14-50P to P050A cable (50A Max.)
JUST POWER ON 25
EN
Bekijk gratis de handleiding van Bluetti Apex 300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bluetti |
| Model | Apex 300 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4501 MB |
