Bluetti AC50P handleiding
Handleiding
Je bekijkt pagina 14 van 72
7.1 AC Charging
Plug the AC50P into a standard wall outlet and start charging. Once it's fully charged,
the AC50P automatically stops charging to prevent overcharging. For a fast charge, you
can enable Turbo Charging in the BLUETTI app, which allows for an 80% capacity in just
50 minutes at an ambient temperature of 25°C (77°F).
AC50P supports four charging methods: AC, solar, car, and generator.
7.Charging
Attention:
• Double-check that all cables are firmly plugged in.
• Avoid getting the plug and socket wet to prevent any potential damage.
7.2 Solar Charging
Connect the solar panels (in series or parallel) to AC50P via the solar charging cable.
When receiving a continuous input of 200W, the AC50P will automatically stop charging
within 3 hours. However, please be aware that the charging time may vary based on
weather conditions, sunlight intensity, panel orientation, and other variables.
Notice:
Make sure your solar panel(s) meet the following requirements:
Voc: 12V-28V Current: 8.5A Max. Power: 200W Max.
EN
JUST POWER ON
14
Bekijk gratis de handleiding van Bluetti AC50P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bluetti |
| Model | AC50P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6137 MB |
