Handleiding
Je bekijkt pagina 22 van 51
22 (800) 449-8691
Before Your First Use
Oven Burn-Off Procedure
Important: Before you use the range, it is essential that
you complete the oven burn-off procedure. This
procedure will take 90 minutes to complete and will
remove all factory oils and residue from its internal parts.
During this process, you may notice a strong odor, some
smoke, and/or condensation on the front of the oven
(including the oven doors, control panel, and side
panels) as any oils and solvents on internal parts are
burned off. This is normal and is the primary reason for
this burn-off. Failure to complete this procedure before
rst using the oven may result in undesirable odors,
avors, and excessive smoke,
Note: For documentation purposes, touch screen
control illustrations are for the BSPIR48 range.
Instructions apply to all ranges unless otherwise noted.
1. Take out the oven racks, and temperature probe (if
necessary).
2. Tap Clean on the Select Mode screen.
3. Tap Start on the Select Clean screen to start the
cleaning cycle, which will take 90 minutes.
4. The Cleaning in Progress timer will start counting
down from “1:30”. You can tap OFF at any time to
stop the process.
5. When the time is up, you will hear a tone to indicate
the Clean cycle is complete. The oven will still be hot
at this point.
6. Wait for the oven to cool completely before you put
back the oven racks.
Bekijk gratis de handleiding van BlueStar BSPIR486Z, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BlueStar |
| Model | BSPIR486Z |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 6055 MB |
