BlueBuilt BBRVMSW01 handleiding
Handleiding
Je bekijkt pagina 6 van 64
10 11
• Before use, check that the voltage on the socket you want to
use matches that on the type plate of the appliance (100-240 V;
50/60 Hz). Damage caused by faulty voltage is not covered by the
guarantee.
• RISK OF ELECTRIC SHOCK! Only use the appliance’s factory-fitted
plug and never change it. e plug must match the type of socket
used to reduce the risk of electric shocks.
• RISK OF ELECTRIC SHOCK! Do not remove the earth contacts from
the plug.
• RISK OF ELECTRIC SHOCK! Never pull the power cable to carry or
move the appliance or to disconnect the plug. Keep the power cable
away from heat, oil, sharp edges or corners and moving parts. Do
not make any changes to the power cable or submerge it in water
or other liquids. Do not turn or kink the power cable, do not roll up
the power cable too tightly after use and do not wind it up around
the appliance; this may damage the insulation layer! Damaged or
tangled power cables increase the risk of electric shocks.
• RISK OF ELECTRIC SHOCK! Do not touch the appliance, plug or mains
cable with wet or damp hands.
• Fully unroll the appliance’s power cable before plugging it into the
socket. is is to prevent heat generation in the cable.
• Do not pass the power cable under a carpet or cover it with mats,
runners and the like. is can lead to unforeseen heat generation.
• Regularly check the appliance for damage to the power cable and
plug. If there is visible damage, a strong smell, or parts become
excessively hot, stop using it immediately and remove the plug from
the socket.
• It is not permitted to open, change or repair the appliance yourself.
Do not drill holes into the appliance anywhere to avoid dangerous
situations. e appliance, plug and/or cable must be repaired and/or
replaced by an electrician or an equivalent qualified person. Repairs
by amateurs invalidate the guarantee and can cause dangerous
situations!
1.5
EXPLANATION OF GRAPHIC SYMBOLS ON
THE PRODUCT AND PACKAGING
Symbol Meaning
e CE marking on this appliance indicates that Coolblue B.V.
declares that this appliance meets the requirements of the
relevant European legislation relating to health, safety and
environmental protection.
e declaration of conformity is available on request from
Coolblue B.V. See Foreword for the contact details.
is symbol indicates that the appliance meets the safety
requirements specified for class II equipment according to IEC
61140.
is symbol indicates that the appliance meets the safety
requirements specified for class III equipment according to IEC
61140.
is symbol on the appliance, accessories or packaging
indicates that this appliance must not be disposed of with
ordinary household waste but must be returned to a collection
point.
is symbol means that the device is intended for indoor use.
EN
EN
Bekijk gratis de handleiding van BlueBuilt BBRVMSW01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BlueBuilt |
| Model | BBRVMSW01 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 4744 MB |