Blueair Cabin P2i handleiding

Handleiding

123456789101112131415161718/ 18

Afdrukken

Je bekijkt pagina 14 van 18

14

3 red LEDs blink in a

triangle formation

should a notification or

error occur (see table

below).

8. Notification

Note:

As a safety precaution the unit cannot start unless the top cover is installed correctly.

7. Idle mode

Flick the control knob

anticlockwise and hold

for 3 seconds until the

lights are turned o.

SITUATION RECOMMENDED ACTION

Top cover open • Check the filter is installed correctly

• Check that the top cover has been correctly

installed

Unit is not working - unit is disconnected from

the control plug.

Check that control knob is correctly installed

and that the cable/connector is not damaged.

Unit is not working - USB charging port overload

If an extra USB charging port is powering too

many external units - ie phones etc - the power

load might be too much for the system and thus

it shuts down.

Remove external units until the unit works.

General hardware failure Contact customer service

Other error not indicated by error code. The

LEDs on the control knob do not light up even

though the unit is functioning.

Contact customer service

x 3 secs

ARTWORK for 501091_User_Manual_P2i_EN_Rev03.indd 14 2018-10-05 17:09

123456789101112131415161718/ 18

Bekijk gratis de handleiding van Blueair Cabin P2i, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Andere merken in Luchtreiniger