Blomberg LRI1854111 handleiding

60 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 17 van 60
EN / 17
of the hose into the waste water or do
not insert it into the drain for more than
15 cm. If it is too long, cut it short.
5. The end of the hose should not be bent,
it should not be stepped on and the
hose must not be pinched between the
drain and the product. Otherwise, water
discharge issues may emerge.
6. If the length of the hose is too short, use
it by adding an original extension hose.
The overall length of the hose shall not
be longer than 3.2 m. To prevent water
leaks, always secure the connection
between the extension hose and the
draining hose of the product with a suit-
able clamp so that it does not come off
and cause leaks.
4.7 Adjusting the Feet
NOTICE
In order to ensure that the product
operates more silently and vibra-
tion-free, it must stand level and
balanced on its feet. Adjust the feet
to ensure balance. Otherwise, the
product may move from its place
and cause bumping, noise and vi-
bration problems.
1. To loosen the nuts on the feet, rotate
the nuts clockwise using the hand tool.
2. Adjust the feet until the product stands
level and stable. To lower the feet, ro-
tate them counterclockwise. To raise
the feet, rotate them clockwise.
3. To retighten the nuts, rotate them coun-
terclockwise using the hand tool.
Adjustment of the Feet:
When you turn the rotary knob shown in-
side the circle in the direction of the ar-
row, the machine will raise 0.3 mm up. If
you turn it in the opposite direction of the
arrow, the machine will lower by 0.3 mm.
You can use the water meter to check the
rear and front feet of the machine for the
proper setting.
Do not adjust the rear feet using re-
chargeable devices. Use a screwdriver in-
stead.
Adjusting the Feet with the Water Level In-
dicator:
To adjust the Water Level Indicator, you
must remove the Detergent Drawer.
The bubble inside the Water Level Indic-
ator must be in the middle for the system
to work correctly.
If the bubble inside the Water Level Indic-
ator is on the left, the right preset foot of
the Washing Machine must be adjusted.
If the bubble inside the Water Level Indic-
ator is on the right, the left preset foot of
the Washing Machine must be adjusted.

Bekijk gratis de handleiding van Blomberg LRI1854111, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkBlomberg
ModelLRI1854111
CategorieWasmachine
TaalNederlands
Grootte4956 MB