Blomberg LDF43520 handleiding
Handleiding
Je bekijkt pagina 21 van 48
EN / 21
salt and/or rinse aid. Some of them also
contain special components such as glass
preservatives and stainless steel preservat-
ives. These tablets work up to a certain wa-
ter hardness level (21°dH). Water softening
salt and rinse aid should be used together
with the tablet detergent above this level.
The best washing performance in dish-
washers is achieved by using detergent,
rinse aid and water softening salt separ-
ately.
When using tablet detergents, follow the
manufacturer's instructions on the deter-
gent packaging.
When using tablet detergent, contact the
detergent manufacturer if your dishes are
wet when the wash cycle has finished and/
or if you notice limescale stains, especially
on glasses.
When you change from tablet detergent
to powder detergent:
• Make sure the salt and rinse aid compart-
ment is full.
• Set the water hardness setting to the
highest position and run a wash cycle
with the dishwasher empty.
• After the empty wash cycle, read the in-
struction manual and adjust the water
hardness setting again according to your
mains water.
• Set the appropriate rinse aid setting.
6.6 Rinse aid
The rinse aid used in dishwashers is a spe-
cial compound to improve drying efficiency
and to prevent traces of water or limescale
from remaining on the washed items. For
this reason, make sure that there is rinse
aid in the rinse aid compartment and use
only rinse aid that is intended for use in
dishwashers.
Filling the rinse aid
1. Open the rinse aid cap with the latch.
2. Fill the compartment to the MAX level.
Bekijk gratis de handleiding van Blomberg LDF43520, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blomberg |
| Model | LDF43520 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 5928 MB |
