Blomberg LDF43520 handleiding
Handleiding
Je bekijkt pagina 17 van 48
EN / 17
NOTICE! To set the system, first find out
your water hardness level from the au-
thorised service in your region and set it
as follows.
After determining the water hardness:
1 With the door closed, first press the On/
Off button to turn on the dishwasher, then
press the On/Off button and P2 buttons to-
gether for 3 seconds to activate the menu.
2. Navigate to the “r” position on the screen
by pressing the P2 key.
3. Set the correct level by selecting one of
the “r:1”,“r:2”,“r:3”,“r:4” or “r:5” positions
with the P3 program key.
4.To save, exit the settings menu by press-
ing the On/Off button for 3 seconds. Your
settings will be saved automatically.
Hardness Level
English Hardness
°dE
German Hardness
°dH
French Hardness
°dF
Water Hardness Level Indicator
0. Level
0-5 0-4 0-8
Bring the water hardness setting
to position 1 by pressing the Se-
lect key. (r1)
1. Level
6-9 5-7 9-13
Bring the water hardness setting
to position 1 by pressing the Se-
lect key. (r1)
2. Level
10-15 8-12 14-22
Bring the water hardness setting
to position 2 by pressing the Se-
lect key. (r2)
3. Level
16-19 13-15 23-27
Bring the water hardness setting
to position 3 by pressing the Se-
lect key. (r3)
4. Level
20-24 16-19 28-34
Bring the water hardness setting
to position 4 by pressing the Se-
lect key. (r4)
5. Level
25-62 20-50 35-90
Bring the water hardness setting
to position 5 by pressing the Se-
lect key. (r5)
Table1: Water Hardness Level Setting
Table
Using a flat head screwdriver, turn the re-
generation setting switch to the same posi-
tion as the hardness level you set on the
control panel. For example, if the setting on
the control panel is 3, turn the regeneration
setting switch to 3.
• If the hardness of the water you use is
above 50°dH (French hardness) or if you
use well water, you should use filters and
water purifiers.
• If the hardness of the water you use is
below 7°dH, you do not need to use salt
in your dishwasher. In this case, the "Low
Salt Indicator Light" on your dishwasher
control panel will be on continuously.
• If your water hardness setting is at level
1, the "Low Salt Indicator Light" will re-
main on continuously even though you
do not need to use salt. If you do add salt
in this position, the salt will not be con-
sumed and the lamp will not come on.
NOTICE!If you move house, you may
need to adjust the water hardness set-
ting of your dishwasher again according
to the water hardness of the place you
move to, taking into account the inform-
ation given above. If the water hardness
setting of your dishwasher has been ad-
justed before, the last water hardness
setting will be displayed on your dish-
washer’s display panel.
Bekijk gratis de handleiding van Blomberg LDF43520, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blomberg |
| Model | LDF43520 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 5928 MB |
